need help with this mochine ( machine), intermittently not spinning....
put out brown control board and just had a quick look, nothing unusual
what is chance the faulty DD motor ?    

probable reasons for that sympton, oob switch or rps sensor board corroded,(remove motor cover,and you will see it).russell

check if lid lock light is on.  If not most likely motor controller board.

Quoted from teknorat

probable reasons for that sympton, oob switch or rps sensor board corroded,(remove motor cover,and you will see it).russell

thanks and will have a look later on

Quoted from albin

check if lid lock light is on.  If not most likely motor controller board.

lid lock light is on

OK, fiddled this one today again , removed motor cover and had a look the sensor pcb, it seems clean and not corroded at all, cleaned and put everything back, she start to spin again.   I got no idea what is going on ???  by the way, where  is oob switch   ?

remove the motor control board, oob switch (micro switch) is now visible.sometimes one of the three wires going to the RPS sensor  break due to tight wiring loom.

thanks, did a load yesterday and it was OK,  today when did another load, machine self destroyed and triggered the circuit breaker.   what a nightmare,  need to find out , maybe motor control board gone....

when i was fixing my machine roger gave me this link that was very helpfull

http://www.ukwhitegoods.co.uk/modules.php?name=Forums&file=viewforum&f=28


might be worth a look.

Hi all again, put out the motor control PCB again, main fuse is gone, two big resistors blown, what can cause this ?  as I do not want to rush to replace pcb and blow up again......

Hi Angao, most likley one of the armatures on the D/D motor is faulty

Cheers
Joe

glad to see another multi-skilled tech , brown goods and white goods ,  has appeared on horizon, thanks Joe...