http://www.forums.hcsd.com.au/cgi-bin/forum/Blah.pl? http://www.eblah.com en http://www.forums.hcsd.com.au/cgi-bin/forum/Blah.pl?m-1273098590/ http://www.forums.hcsd.com.au/cgi-bin/forum/Blah.pl?m-1273098590/#num1 Thu, 6 May 2010 08:29:50 electron http://www.forums.hcsd.com.au/cgi-bin/forum/Blah.pl?m-1272954300/ http://www.forums.hcsd.com.au/cgi-bin/forum/Blah.pl?m-1272954300/#num1 Tue, 4 May 2010 16:25:00 mancity http://www.forums.hcsd.com.au/cgi-bin/forum/Blah.pl?m-1270708873/ http://www.forums.hcsd.com.au/cgi-bin/forum/Blah.pl?m-1270708873/#num1 Thu, 8 Apr 2010 16:41:13 Geoff http://www.forums.hcsd.com.au/cgi-bin/forum/Blah.pl?m-1266806263/ http://www.forums.hcsd.com.au/cgi-bin/forum/Blah.pl?m-1266806263/#num1

Unhealthy noises coming from deck, tape often getting wrapped around the capstan - we're talking a couple of meters here...

Error codes I am getting are H02 and FO6, if that means anything.

Mode switch perhaps?
Doing a bit of a clean up, but the tape sticking to the capstan worries me.]]> Mon, 22 Feb 2010 13:37:43 Electronics Boy http://www.forums.hcsd.com.au/cgi-bin/forum/Blah.pl?m-1265345825/ http://www.forums.hcsd.com.au/cgi-bin/forum/Blah.pl?m-1265345825/#num1
PSU fault, when powered up, odd characters show on the fluro display - just SOME segments of SOME display characters.  Unit is otherwise totally dead.  I can find 16.48v on D9A1 and deck, 4.29v on D9A2 and deck, -35.3v on D9B3 and deck.  So some juice on the cold side, but weather these are normal...  There is 16v across the LA6324 quad op-amp power supply pins.

I was about to recap the PSU as a next step, but also wondering if we have a corrupted uCPU due to the wierd lighting of random segments on the fluro.

Anyone else seen this before?
]]> Fri, 5 Feb 2010 15:57:05 Electronics Boy